For Sale
Instructions
Robokiller materials kit Launching soon! Summary
Robokiller complete materials kit (Launching soon!)
Please note: when you purchase a materials kit you also receive a set of detailed instructions (the pages shown on this site are summaries).
A note on price....the price given is a guide only at this point...may alter before launch.
The kit consists of (summary):
1 x economy cordless drill (new but disassembled)
1 commercial cutting board
4 x leg motor/gearboxes
1 x rods and tubes set
1 x electrical set
1 x fasteners set
1 x miscellaneous set
1 x templates set
This consists of, in more detail:
Cordless drill (disassembled)
(Includes charger -not shown)
The motor and gearbox/clutch assembly from an economy cordless drill is used to drive the lunging head and neck of the Robokiller.
For this to be possible the chuck must first be removed. The chuck is secured using an M4 machine screw but with a left-hand thread. The only way to remove the chuck is to first dismantle the drill and then to secure the motor and to use an impact tool. This is quite tricky to do because the impact tool needs a long adaptor. We have made up a tool for this so we can supply the ready-disassembled item.
Note please that we are not technically selling the cordless drill, rather, by sending the order you are commissioning us to purchase a cordless drill on your behalf and to dismantle it and remove the chuck.
Note also that the chuck itself we will not send (to keep postage costs down since this is not needed).
Commercial chopping board in red, yellow or green (please indicate preference when purchasing).
Low-density plastic (solid polyethylene) 450mm x 300mm x 12mm
Leg Motors, set of 4
The feet/claws of the Robokiller are powered using four motor/gearboxes.
Specification:
Low cost 3V (6V max) motorised gearboxes with mounting holes. 200:1 (70 rpm).
(See the Instructions pages for more information).
Adhesive templates set
-Main body base template
-Top piece template
-2 x head templates
-4 x leg templates
-4 associated leg part templates
-Neck template
Simply peel off the backing and stick to the plastic cutting board and then cut out and drill as per the free instructions. The first image shows the parts as they should look once cut out. (Refer to the instructions pages for more information).
Rods and tubes set:
1 x black plastic nylon rod
1 x red plastic tube
1 x M4 threaded rod
1 x M6 threaded rod
5 x aluminium bars
1 x 40mm silicone tubing (for mounting the claws to the motor spindles)
1 x 40mm flexible tube for the jaws linkage
Electrical items set
-11m of red wire
-11m of black wire
-400mm heat-shrink tube, 3mm, black
-3m heat-shrink tube, 6mm, black
-13 Terminal blocks (3 amp)
-Two on-off-on slider switches
-7 x cable ties
-7 x cable tidies
Fasteners set
44 x wood screws
6 x M6 full steel nuts
7 x M6 steel washers
7 x M5 steel locknuts
24 x M5 steel washers
4 x 16mm M5 machine screw
3 x 40mm M5 machine screws
7 x M4 lock nuts
2 x M4 machine screw 40mm
4 x M4 machines screws 20mm
20 x M4 washers
31 x 16mm wood screws
Miscellaneous items set
-Set of plastic jaws
-2 x small hose connectors
-4 x split pins
-Hinge
-Large plastic gear
-2 x small plastic gear
-Acrylic disk 6mm thick, 24mm diameter
-Rear plate (acrylic sheet)
-4 x neck brackets
-Con-rod spacer washers (dense foam)
-500g of 1.6mm copper-coated steel gas welding rod (for the 'skin')
-10g of 24 SWG tinned copper wire
-50mm diameter Disk of HIPs -or acrylic- (for the controller casing)
_______________________________________________________
The materials kit contains everything that you need except the following:
-Solder
-Hot glue
-Paint
We hope you enjoy turning the above into a robot dinosaur!
Please do send in photos and videos!!
Please note: when you purchase a materials kit you also receive a set of detailed instructions (the pages shown on this site are summaries).
A note on price....the price given is a guide only at this point...may alter before launch.
The kit consists of (summary):
1 x economy cordless drill (new but disassembled)
1 commercial cutting board
4 x leg motor/gearboxes
1 x rods and tubes set
1 x electrical set
1 x fasteners set
1 x miscellaneous set
1 x templates set
This consists of, in more detail:
Cordless drill (disassembled)
(Includes charger -not shown)
The motor and gearbox/clutch assembly from an economy cordless drill is used to drive the lunging head and neck of the Robokiller.
For this to be possible the chuck must first be removed. The chuck is secured using an M4 machine screw but with a left-hand thread. The only way to remove the chuck is to first dismantle the drill and then to secure the motor and to use an impact tool. This is quite tricky to do because the impact tool needs a long adaptor. We have made up a tool for this so we can supply the ready-disassembled item.
Note please that we are not technically selling the cordless drill, rather, by sending the order you are commissioning us to purchase a cordless drill on your behalf and to dismantle it and remove the chuck.
Note also that the chuck itself we will not send (to keep postage costs down since this is not needed).
Commercial chopping board in red, yellow or green (please indicate preference when purchasing).
Low-density plastic (solid polyethylene) 450mm x 300mm x 12mm
Leg Motors, set of 4
The feet/claws of the Robokiller are powered using four motor/gearboxes.
Specification:
Low cost 3V (6V max) motorised gearboxes with mounting holes. 200:1 (70 rpm).
- Based on a regulated 4.5V input:
- Operating temperature range -20C~+50C
- Humidity range 20% ~70%
- No load speed 39 +/- 15% rpm
- No load current 0.11A Max.
- Output torque 3.6 kgf.cm
- Weight 30g
(See the Instructions pages for more information).
Adhesive templates set
-Main body base template
-Top piece template
-2 x head templates
-4 x leg templates
-4 associated leg part templates
-Neck template
Simply peel off the backing and stick to the plastic cutting board and then cut out and drill as per the free instructions. The first image shows the parts as they should look once cut out. (Refer to the instructions pages for more information).
Rods and tubes set:
1 x black plastic nylon rod
1 x red plastic tube
1 x M4 threaded rod
1 x M6 threaded rod
5 x aluminium bars
1 x 40mm silicone tubing (for mounting the claws to the motor spindles)
1 x 40mm flexible tube for the jaws linkage
Electrical items set
-11m of red wire
-11m of black wire
-400mm heat-shrink tube, 3mm, black
-3m heat-shrink tube, 6mm, black
-13 Terminal blocks (3 amp)
-Two on-off-on slider switches
-7 x cable ties
-7 x cable tidies
Fasteners set
44 x wood screws
6 x M6 full steel nuts
7 x M6 steel washers
7 x M5 steel locknuts
24 x M5 steel washers
4 x 16mm M5 machine screw
3 x 40mm M5 machine screws
7 x M4 lock nuts
2 x M4 machine screw 40mm
4 x M4 machines screws 20mm
20 x M4 washers
31 x 16mm wood screws
Miscellaneous items set
-Set of plastic jaws
-2 x small hose connectors
-4 x split pins
-Hinge
-Large plastic gear
-2 x small plastic gear
-Acrylic disk 6mm thick, 24mm diameter
-Rear plate (acrylic sheet)
-4 x neck brackets
-Con-rod spacer washers (dense foam)
-500g of 1.6mm copper-coated steel gas welding rod (for the 'skin')
-10g of 24 SWG tinned copper wire
-50mm diameter Disk of HIPs -or acrylic- (for the controller casing)
_______________________________________________________
The materials kit contains everything that you need except the following:
-Solder
-Hot glue
-Paint
We hope you enjoy turning the above into a robot dinosaur!
Please do send in photos and videos!!
Postage Cost: £12.18
Customer Reviews
No Reviews Posted Yet - be the first!(write review)
Product Review
